12
weight
DYNAMIC—clip the weight on both sides
of rim（dynamic balance test once start）
STATIC— Stick weight in centre
STATIC—optional for balancing the
motorcycle When balancing motorcycle wheels, you
require the (optional) motorcycle adaptor accessory
MJ-II. With the assistance of the extension scale, to
measure Di, Br and Di. Input the measure value into the
Di, Br and Di display window. The input method is
similar to the parameter input of the car.. When we
balance the motorcycle tyre, we do not select the MOT
function if the present scale can measure the value of
dis. And if the present scale can not measure the value
of dis, we need the extension scale to execute the
dynamic balance. First we should select MOT and then
input the parameter to execute the dynamic balance.
ALU1－to balance light aluminum alloy rim
by sticking the weight on the shoulder of the rim.
ALU1
Dis1=Dis + ”
Br*=Br－1 ”
Dia1=Dia2=Dia－1”
ALU2－to balance light aluminum alloy rim by hiding
the weight inside.
Dis1=a+ ‖
Br*=Dis from O point to the outside of the
flange disk － ‖ －Dis
Dia1=Dia-1‖ Dia2=Dia -2 ‖
ALU3－Click the weight inside and stick
the weight outside（outside position is
similar to ALU2）
To Next Page
Loading...