BrightDrop Zevo 600 - Convex Mirrors; Exterior Mirrors; Power Mirrors

BrightDrop Zevo 600 Owner Manual (GMNA-Localizing-U.S./Canada-
16569273) - 2023 - CRC - 11/3/22
22 Keys, Doors, and Windows
The security light, in the instrument cluster,
comes on if there is a problem with arming
or disarming the theft-deterrent system.
The system has one or more remote keys
matched to an immobilizer control unit in
the vehicle. Only a correctly matched
remote key will start the vehicle. If the
remote key is ever damaged, you may not
be able to start your vehicle.
When trying to start the vehicle, the
security light may come on briefly.
If the vehicle does not start and the security
light stays on, there is a problem with the
system. Turn the vehicle off and try again.
If the vehicle will not turn on or off, and the
remote key appears to be undamaged, try
another remote key. Or, you may try
placing the remote key in the backup
location. See Remote Key Operation 0 7.
If the vehicle will not turn on or off with
the other remote key or in the backup
location, the vehicle needs service. If the
vehicle does turn on or off, the first remote
key may be faulty. See your dealer.
It is possible for the immobilizer system to
learn new or replacement remote keys. Up
to eight remote keys can be programmed
for the vehicle. To program additional
remote keys, see “Programming Remote
Keys to the Vehicle” under Remote Key
Operation 0 7.
Do not leave the remote key or device that
disarms or deactivates the theft-deterrent
system in the vehicle.
Exterior Mirrors
Convex Mirrors
{
Warning
A convex mirror can make things, like
other vehicles, look farther away than
they really are. If you cut too sharply
into the next lane, you could hit a vehicle
that is driving next to you. Check the
inside mirror or glance over your
shoulder before changing lanes.
The upper portion of both the driver and
passenger side mirrors is flat.
The lower portion of each mirror is convex.
A convex mirror surface is curved so more
can be seen from the driver seat. The
convex portions of each mirror can be
adjusted manually.
Power Mirrors
To adjust the mirrors:
1. Press
} (1) or | (2) to select the driver
or passenger side mirror. The indicator
light comes on.
2. Press the arrows on the control pad to
move the mirror up, down, right, or left.
3. Adjust the outside mirror so that the
side of the vehicle and the area behind
are seen.
4. Press either
} or | again to deselect
the mirror. The indicator light goes off.