BrightDrop Zevo 600 - Page 74

BrightDrop Zevo 600 Owner Manual (GMNA-Localizing-U.S./Canada-
16569273) - 2023 - CRC - 11/3/22
Instruments and Controls 73
DIC Info Page Options
The info pages on the DIC can be turned on
or off through the Options menu.
1. Press
o to access the cluster
applications.
2. Move the thumbwheel up or down
through the list of available applications.
3. Press the thumbwheel to select the
application, then press
p to enter the
application menu.
4. Move the thumbwheel
w or x to
move through the list of possible
information displays.
5. Press the thumbwheel while an item is
highlighted to select or deselect
that item.
When an item is selected, a checkmark
will appear next to it.
DIC Info Pages
The following is the list of all possible DIC
info page displays. Some may not be
available for your particular vehicle. Some
items may not be turned on by default but
can be turned on through the Options app.
See “DIC Info Page Options” earlier in this
section.
Drive Summary : Displays the current
distance traveled, in either kilometers (km)
or miles (mi).
It also includes the Average Efficiency.
Average Efficiency shows the approximate
average kilometers per kilowatt hour kWh
(km/kWh) or miles per kilowatt hour
kWh(mi/kWh). This number only reflects the
approximate average electrical energy
economy that the vehicle has at that
moment, and changes as driving conditions
change.
The timer shows the time in the current
drive cycle.
All values in the Drive Summary are
automatically reset each time the vehicle is
started.
Trip 1 or Trip 2 and Average Efficiency : The
Trip display shows the current distance
traveled, in either kilometers (km) or
miles (mi), since the trip odometer was last
reset.
The Average Efficiency shows the
approximate average kilometers per kilowatt
hour kWh (km/kWh) or miles per kilowatt
hour kWh(mi/kWh). This number is
calculated based on the number of km/kWh
or mi/kWh recorded since the last time this
menu item was reset. This number only
reflects the approximate average electrical
energy economy that the vehicle has at that
moment, and changes as driving conditions
change.
The values can be reset by pressing and
holding the thumbwheel while either the
Trip 1 or the Trip 2 display is active.
Timer : The display shows the amount of
time that has passed since the timer was
last reset. To start/stop the timer, press the
thumbwheel to access the menu while this
display is active. To reset the timer to zero,
press the thumbwheel while the menu for
this display is active.
Tire Pressure : Shows the approximate
pressures of all four tires. Tire pressure is
displayed in either kilopascal (kPa) or in
pounds per square inch (psi). If the pressure
is low, the value for that tire is shown in
amber. Pressing and holding the
thumbwheel will display a series of alerts
for Tire Manual Learning.
Driver Assistance : If equipped, shows
information for Adaptive Cruise Control
(ACC), Follow Distance, Lane Keep Assist
(LKA) and Forward Collision Alert (FCA).