Brillcam Inc. Copyright 2020-2021 Page 5 , Total 83
Thank you for purchasing Brillcam NVR!
This user’s manual is designed as a reference tool only and is applicable to all Brillcam 3000 Series model
NVRs. Some features and options may vary model to model. For a brief overview of your device please refer
to the NVR Quick Start Guide included with your device.
Please open the accessory bag to check the items one by one in accordance with the included packing list.
Contact your local retailer if anything is missing or damaged.
Important Safeguards and Warnings
1. Electrical Safety
Installation and operation should conform to your local electrical safety codes. The product must be
grounded to reduce the risk of electric shock. We assume no liability or responsibility for any fires or
electric shock caused by improper handling or installation.
2. Transportation Security
Heavy stress, violent vibrations, and moisture are not allowed during transportation, storage, or installation.
3. Installation
Always keep the device upright and handle with care. Do not apply power to the device before completing
the installation. Do not place objects on the NVR.
4. Qualified Engineers Needed
All examinations and repair work should be done by qualified service engineers. We are not liable for any
problems caused by unauthorized modifications or attempted repairs to the device.
5. Environment
The device should be installed in a cool, dry place away from direct sunlight, flammable materials, explosive
substances, etc. This series product should be transported, stored, and used in the specified environments:
• The function of the ITE with concerns to IEC 60950-1 is considered now likely to require a connection to
an Ethernet network with an outside power source, including campus environments.
• If applicable, the installation instructions clearly state that the ITE is to be connected only to designated
POE networks without routing to an outside power source.
6. Accessories
Be sure to use only the accessories recommended by the manufacturer. Before installing, please open the
package and check that all proper components are included. Contact your local retailer if something is
broken or missing in your package.
Before operating, please read the following instructions carefully.
• Keep away from extremely hot places and sources of heat.
• Avoid direct sunlight.
• Keep away from extremely humid places.
• Avoid any violent vibrations.
To Next Page