Model 671 User’s Manual REMOTE COMMUNICATIONS
Bristol Instruments, Inc. 35
*OPC?
The *OPC (operation complete) query returns OFF when all pending
device operations are complete, ON if an operation is pending.
The *RCL (recall) command restores instrument settings.
The *RST (reset) command returns the instrument’s settings to a
known state.
Commands Affected by *RST
SETTING AFTER AN *RST COMMAND
The *SAV command saves instrument settings.
The *STB (status byte) query returns the current value of the
instrument’s status byte.
Returns an integer that is the sum of all the bit values for those bits
that are set. See the instrument Status Byte table.
To Next Page
Loading...
