Broadcom G610 - LEDs; Weight and Physical Dimensions; Environmental Requirements; Power Supply Specifications

53-1004408-11 Installation Guide Brocade
®
G610 Switch Hardware Installation Guide
LEDs
System Component Description
System power LED One green system power status LED (upper) on the left side.
System status LED One bicolor (green/amber) system status LED (lower) on the left side.
Ethernet port link LED One link LED on the left of the RJ-45 connector. This LED glows green for 1000Mb/s and amber for
100/10Mb/s.
Ethernet port activity LED One green activity LED on the right of the RJ-45 connector.
FC port status LED 24 bicolor (green/amber) port status LEDs, one for each SFP+ port on the switch.
NOTE
All LEDs are on the port-side view of the device.
Weight and Physical Dimensions
Empty weight refers to the device with a built-in power supply and fan assemblies but no SFP+ or QSFP transceivers.
Height Width Depth Weight (Empty) Weight (Fully Loaded)
4.29 cm (1.69 in.) 42.88 cm (16.88 in.) 30.64 cm (12.06 in.) 4.2 kg (9.30 lb) 5.75 kg (12.65 lb)
Environmental Requirements
Condition Operational Nonoperational
Ambient temperature 0°C to 40°C (32°F to 104°F) –25°C to 70°C (–13°F to 158°F)
Relative humidity
(noncondensing)
10% to 85% at 40°C (104°F) 10% to 90% (noncondensing)
Altitude (above sea level) 0m to 3000m (9842 feet) 0 to 12,000m (39,370 feet)
Shock 20.0G, 6 ms, half-sine wave 33.0G, 11 ms, half-sine wave, 3G axis
Vibration 0.5G sine, 0.4 gms random, 5 Hz to 500 Hz 2.0G sine, 1.1 gms random, 5 Hz to 500 Hz
Airflow Maximum: 54.5 cmh (32.1 cfm)
Nominal: 36.35 cmh (21.4 cfm)
N/A
Operating noise Maximum: 64 dBA
Normal: 57 dBA
N/A
Power Supply Specifications
Maximum
Output Power
Rating (DC)
Input Voltage Input Line Frequency
Maximum
Input
Current
Maximum Inrush Current
150W 100–240 VAC (nominal)
90–264 VAC (range)
50/60 Hz (nominal)
47 Hz to 63 Hz (range)
2.2A 50A
53-1004408-11
58
Broadcom