Brocade Communications Systems ICX 6430-C User Manual

12 Brocade ICX 6430-C Compact Switch Hardware Installation Guide
53-1002817-02
Summary of installation tasks
2
• A magnet mount option is available to order to mount the device securely on a metal surface.
Summary of installation tasks
Follow the steps listed in Table 5 to install your device. Details for each of these steps are provided
on the pages indicated.
Installation precautions
Follow all precautions when installing a device.
General precautions
DANGER
All fiber-optic interfaces use Class 1 lasers.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 40
ο
C (104
ο
F).
CAUTION
Make sure the airflow around the front, sides, and back of the device is not restricted.
TABLE 5 Installation tasks
Task
number
Task Where to find more information
1 Ensure that the physical environment that will host the
device has the proper cabling, ventilation, and clearance.
“Preparing the installation site” on
page 14
2 Unpack the device and all included accessories, “Items included with an ICX 6430-C
device” on page 11
3 Install the device on a desktop, in an equipment rack, on a
wall, or on a metal surface.
“Installing the device” on page 15
4 Once the device is installed, plug the device into a nearby
power source that adheres to the regulatory requirements
outlined in this manual.
“Powering on the system” on page 30

Brocade Communications Systems ICX 6430-C Specifications

General

Brand	Brocade Communications Systems
Model	ICX 6430-C
Category	Switch
Language	English