Brocade Communications Systems ICX 6430-C User Manual

Brocade ICX 6430-C Compact Switch Hardware Installation Guide 33
53-1002817-02
Chapter
4
Managing an ICX 6430-C device
In this chapter
•Temperature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Temperature settings
The device contains temperature sensors that the software reads based on a configurable device
poll time. The device has two automatic speed fan control settings based on the temperature. To
protect the device from overheating, the following temperature threshold levels exist:
• The warning level is the temperature at which the device generates a syslog message. It is
configurable up to
83°C.
• The shutdown level is the temperature at which the device reboots. It is set by the device and is
not configurable. When the device temperature reaches the shutdown level, it generates a
warning message that the device’s temperature is over the shutdown level and the device will
shutdown in 5 minutes. The system restarts 5 minutes after the device reaches the
temperature shutdown level.
TABLE 6 Temperature thresholds
Model Warning level temperature threshold
(°C)
Critical (shutdown) temperature
threshold
(
°C)
ICX 6430-C12 Brocade recommends setting the
warning level temperature no higher
than 83°C.
88°C

Brocade Communications Systems ICX 6430-C Specifications

General

Brand	Brocade Communications Systems
Model	ICX 6430-C
Category	Switch
Language	English