Brocade Communications Systems ICX 7450 series User Manual

Syntax: show ip ospf redistribute route [ ip-addr ip-mask ]
The ip-addr ip-mask parameter species a network prex and network mask. Here is an example.
Brocade# show ip ospf redistribute route 192.213.1.0 255.255.255.254
192.213.1.0 255.255.255.254 fwd 0.0.0.0 (0) metric 10 connected
Displaying OSPF database information
The following command displays the OSPF database.
device# show ip ospf database
Index Area ID Type LS ID Adv Rtr Seq(Hex) Age
Cksum SyncState
1 0.0.0.200 Rtr 192.168.98.111 192.168.98.111 8000003b 626 0xf885 Done
2 0.0.0.200 Rtr 192.168.98.213 192.168.98.213 800000c9 963 0x209c Done
3 0.0.0.200 Rtr 192.168.98.113 192.168.98.113 80000028 169 0x0275 Done
4 0.0.0.200 Rtr 192.168.98.112 192.168.98.112 8000002d 226 0x1c03 Done
5 0.0.0.200 Net 193.113.111.113 192.168.98.113 8000001f 1132 0x353d Done
6 0.0.0.200 Net 192.213.111.213 192.168.98.213 8000002d 1683 0x17bc Done
Syntax: show ip ospf database
TABLE 62 show ip ospf databaseoutput descriptions
This eld Displays
Index ID of the entry
Area ID ID of the OSPF area
Type Link state type of the route.
LS ID The ID of the link-state advertisement from which the router learned this
route.
Adv Rtr ID of the advertised route.
Seq(Hex) The sequence number of the LSA. The OSPF neighbor that sent the LSA
stamps the LSA with a sequence number. This number enables the device
and other OSPF routers to determine which LSA for a given route is the
most recent.
Age The age of the LSA in seconds.
Chksum The checksum for the LSA packet. The checksum is based on all the elds
in the packet except the age eld. The device uses the checksum to verify
that the packet is not corrupted.
SyncState This eld indicates whether the synchronization is complete or not.
Displaying OSPF external link state information
To display external link state information, enter the following command at any CLI level.
device# show ip ospf database external-link-state
Index Age LS ID Router Netmask Metric Flag Fwd Address
SyncState
1 591 10.65.13.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
2 591 10.65.16.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
3 591 10.65.14.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
4 591 10.65.17.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
5 592 10.65.12.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
6 592 10.65.15.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
7 592 10.65.18.0 10.65.12.1 ffffff00 8000000a 0000 0.0.0.0 Done
Displaying OSPF information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 281

Brocade Communications Systems ICX 7450 series Specifications

General

Brand	Brocade Communications Systems
Model	ICX 7450 series
Category	Switch
Language	English