BROMECH ATP ASP - Unit Price Setting; PLU Setting; Indirect PLU Setting

ATP_ASP Price Computing Scales Operation Manual Rev:Y2,August,2020
- 7 -
5. Unit Price Setting
Weight Unit Price Total
Price
 Make sure platform is empty and display is
zero.
 Place goods to be weighed on the platform.
 Enter the unit price by pressing numeric
keys. Total price will be calculate
automatically.
6. PLU Setting
6.1 Indirect PLU Setting
ZTP/ZSP can store 10 indirect unit price values. It can select from 0 to 9 numeric
keys.
Save to memory
1 By pressing numeric keys enter the unit price 10.
2 Press and hold , display will be shown
3 Press numeric key 0 to 9, to select location.
4 If want to select to numeric key 1, press 1.
5 Unit price 10 saved into numeric key 1.
Re-Cal Unit Price
When you want to weigh stored unit price,
1 Press , display will be shown
2 Press the numeric key, which you stored in 0 to 9.
3 If want to use stored in 1, press 1.
0.000
0.00
0.00
1 500
0.00
0.00
1 500
5.00
750
0000
10
0
save
pos
Ps 0-9
Plu
saved
load
pos
Ps 0-9