1.PRECAUTIONS
DISCONNECT ALL POWER TO THIS UNIT BEFORE
INSTALLING, CLEANING, OR SERVICING. FAILURE
TO DO SO COULD RESULT IN BODILY HARM OR
DAMAGE THE UNIT.
Permit only qualified persons to service the instrument
Before connecting or disconnecting any components, remove the
power.
Failure to observe these precautions bodily harm or damage to or
destruction of the equipment.
The weighing scale is a precision electronic instrument, handle it carefully.
Do not install the scale in direct sunlight.
Verify the local voltage and receptacle type are correct for the scale.
Only use original adaptor, other could cause damage to the scale.
Pluggable equipment must be installed near an easily accessible socket outlet.
Avoid unstable power sources. Do not use near large users of electricity such
as welding equipment or large motors.
Avoid sudden temperature changes, vibration, wind and water.
Avoid heavy RF noise.
Keep the scale clean
To Next Page
Loading...