Brook Wingman PS2 - Advanced Functions; Clearing Turbo Function; Remap Settings

11 12
The following instructions are based on the PS4 controller. For those using
other controller, please refer to the Corresponding Buttons List.
❶ Enter the setting mode
Press both SHARE and PS buttons to enter Turbo setup
mode.
The yellow indicator means you enter Turbo setup
mode.
❷ Erasing all Turbo function buttons
Press both SHARE and OPTION buttons to cancel all
Turbo mode settings.
❸ Exit
Press the PS button to leave Turbo setup mode. The
yellow indicator will then turned off.
The following instructions are based on the PS4 controller. For those using
other controller, please refer to the Corresponding Buttons List.
❶ Enter the setting mode
Press both OPTION and PS buttons to enter Remap setup
mode.
The purple indicator means you enter Remap setup mode.
❷ Transfer a function from one button to another. (e.g., Setting ■ as ●)
Select a button you want to remap.
For example, to have the  button
act as , press  once, then press
both SHARE and .
❸ Transfer a function from one button to multiple buttons. (e.g., Setting ✕
as ■ ＋●)
To have  act as “ + ”, press 
once, then press SHARE, , and .
❹ Save
Press OPTION to save your settings.
❺ Exit
Press the PS button to leave Remap setup mode. The purple indicator will
then turned off.
Remap Settings
Clearing Turbo Function