Brookeld Engineering Laboratories, Inc. Page 32 Manual No. M00-151-I0614
Inaccurate Readings
❏ Verify spindle, speed and model
❏ Verify test parameters: temperature, container, volume, method. Refer to:
• Dial Viscometer Operating Manual; Section II.4 — Considerations for Making Measurements
• Dial Viscometer Operating Manual; Appendix A — Viscosity Ranges
• Dial Viscometer Operating Manual; Appendix B — Variables in Viscosity Measurement
❏ Perform a calibration check. Follow the instructions in Appendix C.
• Verify tolerances are calculated correctly.
• Verify calibration check procedures were followed exactly
If the unit is found to be out of tolerance, the unit may be in need of service. See Appendix H for
details on how to return your viscometer.
To Next Page
Loading...
