To Next Page

To Previous Page

E0608

Brookeld Engineering Laboratories, Inc. Page 7 Manual No. M00-151-I0614

Users within the European Union:

Please contact your dealer or the local authorities in charge of waste management on how to

dispose of this product properly. All Brookeld oces and our network of representatives and

dealers can be found on our website: www.brookeldengineering.com

Users outside of the European Union:

Please dispose of this product according to your local laws.

Installation Category I, Pollution Degree II, Altitude 2000m (max).

UL Certication File No. E22083 for explosion-proof version of Dial Reading Viscometer: Built

to Class 1, Division 1, Group D standards.

Brookeld Dial Reading Viscometers now have two year limited warranty from date of purchase

against defects in materials and workmanship. e Viscometer must be returned to Brookeld

Engineering Laboratories, Inc. or the Brookeld dealer from whom it was purchased for no charge

warranty evaluation service. Prior to the return of the viscometer, you must call for a return

authorization number.

I.4 Set-Up

e shipping box containing your instrument should be saved for future use when returning

your instrument to Brookeld or an authorized dealer for service. e carrying case for standard

viscometers/rheometers should also be saved since this provides added protection for these

instruments during shipment. Failure to use these specially designed containers for transportation

can negate the warranty on your instrument. Please contact Brookeld if you misplace or damage

these containers. Replacements are available for a small cost.

1) Assemble laboratory stand as shown in Appendix D.

2) Mount the Viscometer securely on a Brookeld laboratory stand. e metal handle

should be inserted into the laboratory stand clamp.

Level the viscometer, referring to the bubble level on the instrument. If the viscometer

cannot be leveled, recheck the laboratory stand assembly.

Verify that the viscometer's power requirements match your power source before

connecting it to power.

I.5 IQ, OQ, PQ

Please refer to our website, www.brookeldengineering.com, for a guideline document for

validating this instrument to meet IQ, OQ, PQ (Installation Qualication, Operation Qualication,

Performance Qualication) requirements for those customers who need such documentation.

Brookfield RV1 User Manual

Questions and Answers: