EasyManuals Logo

Brother 1034D Manual

Brother 1034D
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Serger Badge: Brother 1034D
Age: Grade 9-Adult
28. Free-arm cover - can be used without bed extension for hemming cuffs, pant legs, and
other small circular clothing/accessories
29. Bed extension - can be removed to allow free-arm sewing
30. Knife lever - allows user to lock knife in place so that it no longer cuts fabric off; used for
finishing edges
Accessories:
1. Soft cover - plastic cover that keeps dust off machine
2. Accessory bag - plastic bag with all accessories
3. Tweezers - used to thread machine
4. Thread net (4) - used to hold thread in place on spools; especially useful for loosely
spun thread
5. Thread spool cap (4) - used to hold short thread spools in place
6. Cleaning brush - used to clean serger before and after each use
7. Hexagonal (Allen) wrench - used to remove and replace needles
8. Needle set - replacement needles to use in machine
9. Blind stitch foot - used for blind stitching, flatlock stitching, and pin tucking
10. Trim trap - attach to front of machine to catch fabric trimmed off by knife
11. Gathering foot - used for gathering fabric
12. Thread spool adaptor (not pictured) (4) - used to secure large thread spools on spool
pins
2. Safety Guidelines
Machine use is for customers Grade 9-Adult.
Use only the attachments, power cord, and accessories that come with machine.
Never operate machine if the power cord is frayed or damaged in any way.
Do not drop the machine.
To disconnect the machine, turn the controls to off and remove plug from outlet (do not
pull by the cord).
Keep your fingers away from all moving parts.
Always inspect needles to make sure they are straight and unbroken before using
Always keep fingers far away from upper knife while serging
Never use straight pins with needles or knife

Other manuals for Brother 1034D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother 1034D and is the answer not in the manual?

Brother 1034D Specifications

General IconGeneral
TypeSerger
Number of Threads3 or 4
Stitch Length1.0mm to 4.0mm
Differential FeedYes
Differential Feed Ratio0.7 to 2.0
Maximum Sewing Speed1, 300 stitches per minute
Color-Coded ThreadingYes
Adjustable Stitch WidthYes
Free ArmYes
Thread TensionAdjustable
Presser Foot LifterYes
Built-in Thread CutterYes
Free Arm CapabilityYes
Power Requirements120V, 60Hz
Stitch Typesrolled hem
Stitch Width5.0mm - 7.0mm (overlock), 2.0mm (rolled hem)
NeedleStandard sewing machine needles (size 11 or 14)
Included Accessoriesgathering foot

Related product manuals