Brother BAS-320 - [I] Upper Thread T Hread Ing; [}]Bobbin Thread Winding

ITl Upper thread t hr eading
* Thread the upper thread as shown in the diagrams below .
< With cotton thread>
[}] Bobbin thread winding
0
I
POWER
<With synth etic thread >
(1) Sl ide the bobbin 0 all the way onto the spindle.
(2) Thread the thread as shown in the figure s, wind
the thread around the bobbin 0 several times in
the direction of the arrow , and then depress the
bobbin w i nder stop l atch f).
(3) Turn th e pow er sw it ch on.
(4) With the step back sw itch depressed , press the
s tart tr eadle e to wind the thread around the
bobbin.
(
Release
the step back switch once the machine )
has
started to wind thread.
(5) The bobbin winder stop l atch f) will automatica lly
release
when the bobbin is f il led to approximately
80% of capacity.
(6) Release the start treadle 8.
(7) Remove the bobbin 0 . and cut the thread with the
thread cutte r 0 .
-4 -
From the library of: Superior Sewing Machine & Supply LLC