2. SPECIFICATIONS
BAS-341H, BAS-342H
2
2. SPECIFICATIONS
Sewing machine Lock stitch pattern tacking sewing machine
Stitch formation Single needle lock stitch
Max. sewing speed 2,800 sti/min
Max. sewing area (XxY) BAS-341H: 250 x 160 mm BAS-342H: 300 x 200 mm
Feed mechanism Intermittent feed, pulse motor drive
Stitch length
0.05 − 12.7 mm
Maximum No. of stitches 20,000 stitches (per program)
No. of sewing data items
that can be stored
999 (Internal memory, SD card, USB memory) (*1)
Work clamp lift method Pneumatic cylinder method
Work clamp height Max. 30 mm
2-step work clamp Integrated-type work clamp
Intermittent presser foot lift
amount
22 mm
Intermittent presser foot
stroke
2 − 4.5 mm, 4.5 − 10 mm or 0 (Default setting 3 mm)
Hook Double-capacity shuttle hook
Wiper device Standard equipment
Thread trimmer Standard equipment
Digital tension Standard equipment
Thread breakage detector Standard equipment
Cycle programs 30
Motor 550 W AC servo motor
Weights
Machine head Approx. 160 kg, LCD panel Approx. 0.8 kg
Control box 12 kg (Differs depending on destination)
Power source
Single-phase 220V / 230V, 3-phase 220V / 380V / 400V
(For three-phase 380 V/400 V, the trans box is required.)
Air pressure 0.5 MPa 1.8 l/min.
(*1) The number of data items and stitches that can be stored will vary depending on the number of stitches in each
program.
No guarantees of operation can be given for any media.
To Next Page
Loading...
