3. INSTALLATION
9
BAS-341H, BAS-342H
3-7. Installing the LCD panel
(1) Cradle
(2) Rubber cushion
(3) Wood screws [4 pcs.]
(4) Setting plate
(5) Flat screws [4 pcs.]
(6) LCD panel
(7) Staples [2 pcs.]
・ Pass the cord of the LCD panel (8)
through the table hole, and then
insert it into the (PANEL) connector
(9) on the side of the control box.
・ Tighten the four wood screws (3) so
that the thickness of the rubber
cushion (2) is 5 mm.
3574B
To Next Page
Loading...
