Brother DCP-1617NW

To Next Page

To Previous Page

2-382-38

 Confidential Confidential

 

7.17.133 HanHandsedset holt holder (der (onlonly for my for modeodels wils with hath handsndset)et)

(1)(1) RemRemove thove the three three tape taptittite bind B M4e bind B M4x12 scx12 screwrews.s.

(2)(2) ReleaRelease the hook PCB hase the hook PCB harness from thrness from the securie securing fixtureng fixtures of the side covs of the side cover L. Releaser L. Release thee the

four hooks to remove the handset holder from the side cover L.four hooks to remove the handset holder from the side cover L.

(3)(3) RemovRemove the tapte the taptite cup B M3x8 site cup B M3x8 screwcrew. Releas. Release the four hoe the four hooks to remoks to remove the lowove the lowerer

handset holder from the handset holder from the upper handset holder.upper handset holder.

(4)(4) ReleaRelease the hook tse the hook to remove tho remove the hook PCB ASSe hook PCB ASSY from the lowY from the lower handseer handset holdert holder, and, and

release the hook PCB harness from the securing fixtures.release the hook PCB harness from the securing fixtures.

(5)(5) ReleaRelease the two hose the two hooks of the hoks of the hook actuaook actuator to remotor to remove it from thve it from the hook PCB ASSYe hook PCB ASSY..

Fig. 2-35Fig. 2-35

Harness routing: Refer toHarness routing: Refer to “

“88.. Hook PCB harness (only for models with handset) (side cover L)Hook PCB harness (only for models with handset) (side cover L)””

andand “

“99.. Hook PCB harness (only for models with handset) (lower handset holder)Hook PCB harness (only for models with handset) (lower handset holder)””..

Taptite bind BTaptite bind B

M4x12M4x12

Side cover LSide cover L

Upper handset holderUpper handset holder

Hook PCB ASSYHook PCB ASSY

Hook actuatorHook actuator

HookHook

HooksHooks

Lower handset holderLower handset holder

Taptite cup B M3x8Taptite cup B M3x8

HooksHooks

HookHook