Brother DCP-1623W - Page 123

2-352-35
 Confidential Confidential
 
Fig. 2-32Fig. 2-32
Assembling Note:Assembling Note:
•• Insert the folInsert the folding sectiding section of the main PCB inson of the main PCB insulatioulation sheet into the gan sheet into the gap between thp between the USBe USB
connector and the main shield plate.connector and the main shield plate.
Main PCB insulation sheetMain PCB insulation sheet
Main PCB ASSYMain PCB ASSY
Main shield plateMain shield plate
Folding sectionFolding section
USB connectorUSB connector
<View from the front bottom side><View from the front bottom side>