1.3.11.3.111 Display LAN Display LAN connection stconnection status (function atus (function code: 33)code: 33)
(Network support model only)(Network support model only)
<Function><Function>
This function is used to check the connection status of the wired LAN.This function is used to check the connection status of the wired LAN.
<Operating Procedure><Operating Procedure>
LLCCDD LLAAN N ccoonnnneeccttiioon n ssttaattuuss
Active 100B-FDActive 100B-FD 100B-FD100B-FD
Active 100B-HDActive 100B-HD 100B-HD100B-HD
Active 10B-FDActive 10B-FD 10B-FD10B-FD
Active 10B-HDActive 10B-HD 10B-HD10B-HD
IInnaaccttiivvee NNoot t ccoonnnneecctteedd
Non-numeric key pad modelsNon-numeric key pad models
(1(1)) PrPresess s ththe e [[
▲▲
] or [] or [
▼▼
] button in the initial] button in the initial
state of maintenance mode to displaystate of maintenance mode to display
"MAINTENANCE 33" on the LCD, and"MAINTENANCE 33" on the LCD, and
press the [OK] button. One of thepress the [OK] button. One of the
following items is displayed on the following items is displayed on the LCDLCD
depending on the wired LAN connectiondepending on the wired LAN connection
of the machine.of the machine.
(2)(2) When thWhen the [Se [Stoptop/Exi/Exit] butt] button is prton is pressessed,ed,
the machine returns to the initial state ofthe machine returns to the initial state of
maintenance mode.maintenance mode.
Numeric key pad modelsNumeric key pad models
(1)(1) PresPress the [3s the [3] but] button twton twice iice in the in the initnitialial
state of maintenance mode. One of thestate of maintenance mode. One of the
following items is displayed on the LCDfollowing items is displayed on the LCD
depending on the wired LAN connectiondepending on the wired LAN connection
of the machine.of the machine.
(2)(2) When tWhen the [X] ohe [X] or [Sr [Stoptop/Exi/Exit] but] buttotton isn is
pressed, the machine returns to thepressed, the machine returns to the
initial state of maintenance mode.initial state of maintenance mode.
To Next Page
Loading...
