Brother DCP-1623W - Page 61

1-451-45
 Confidential Confidential
 
4.4.2.2.33 PaPapeper ir is cs cururleledd
4.4.2.2.44 PaPapeper ir is js jamammemedd

Paper is jammed in Paper is jammed in the paper tray sectionthe paper tray section

Paper is jammed in the paper eject pathPaper is jammed in the paper eject path
<User Check><User Check>
-- Select “ReSelect “Reduce Paper cuduce Paper curl mode” in the drirl mode” in the driverver..
-- Check that the thicCheck that the thickness of the paper is withkness of the paper is within the standain the standard.rd.
<User Check><User Check>
-- RotatRotate the paper 180 dege the paper 180 degrees in the paprees in the paper trayer tray..
-- Flip throuFlip through the paper angh the paper and reset it in the paper trd reset it in the paper trayay..
-- Check that the thicCheck that the thickness of the paper is withkness of the paper is within the standain the standard.rd.
-- Check thaCheck that there is no label stt there is no label stuck in the papeuck in the paper feed path.r feed path.
SStteepp CCaauussee RReemmeeddyy
11
Foreign object in the front of theForeign object in the front of the
machinemachine
Remove the foreign object.Remove the foreign object.
Check for labels stuck on the side or bottomCheck for labels stuck on the side or bottom
of parts.of parts.
22
Paper feed actuator L/R coming offPaper feed actuator L/R coming off
or caught in sections of the machineor caught in sections of the machine
Reattach the paper feed actuator L/R.Reattach the paper feed actuator L/R.
33
Connection failure of the paperConnection failure of the paper
feed/paper printing position sensorfeed/paper printing position sensor
PCB harnessPCB harness
Reconnect the paper feed/paper printingReconnect the paper feed/paper printing
position sensor PCB harness.position sensor PCB harness.
44
Paper feed/paper printing positionPaper feed/paper printing position
sensor PCB failuresensor PCB failure
Replace the paper feed/paper printingReplace the paper feed/paper printing
position sensor PCB ASSY.position sensor PCB ASSY.
55 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
<User Check><User Check>
-- RotatRotate the paper 180 dege the paper 180 degrees in the paprees in the paper trayer tray..
-- Check that the thicCheck that the thickness of the paper is withkness of the paper is within the standain the standard.rd.
-- Check thaCheck that there is no label stt there is no label stuck in the papuck in the paper feed path.er feed path.
SStteepp CCaauussee RReemmeeddyy
11 TToop p ccoovveer r iis s nnoot t cclloosseedd CClloosse e tthhe e ttoop p ccoovveerr..
22
Foreign object in the rear of theForeign object in the rear of the
machinemachine
Remove the foreign object.Remove the foreign object.
Check for labels stuck on the side or bottomCheck for labels stuck on the side or bottom
of parts.of parts.
33
Eject actuator caught in sections ofEject actuator caught in sections of
the machinethe machine
Reattach the eject actuator.Reattach the eject actuator.
44
Connection failure of the ejectConnection failure of the eject
sensor PCB harnesssensor PCB harness
Reconnect the eject sensor PCB harness.Reconnect the eject sensor PCB harness.
55 EEjjeecct t sseennssoor r ffaaiilluurree RReeppllaacce e tthhe e eejjeecct t sseennssoor r PPCCB B AASSSSYY..
66
Connection failure of the paperConnection failure of the paper
feed/paper printing position sensorfeed/paper printing position sensor
PCB harnessPCB harness
Reconnect the paper feed/paper printingReconnect the paper feed/paper printing
position sensor PCB harness.position sensor PCB harness.
77
Paper feed/paper printing positionPaper feed/paper printing position
sensor PCB failuresensor PCB failure
Replace the paper feed/paper printingReplace the paper feed/paper printing
position sensor PCB ASSY.position sensor PCB ASSY.
88 FFuusseer r uunniit t ffaaiilluurree RReeppllaacce e tthhe e ffuusseer r uunniitt..
99 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..