Brother DCP-330C - Loading Paper and Other Media

Chapter 2
16
Loading paper and
other media 2
Note
To print on Photo (4"×6") or Photo L
(3.5"×5") paper, you must use the photo
bypass tray. (See Loading photo
paper on page 20.)
a Pull the paper tray completely out of the
machine.
If the paper support flap is open, close it
and lift the output paper tray cover (1).
b Press and slide the paper side guides (1)
and paper length guide (2) to fit the
paper size.
c Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
1
1
2