Brother DCP-540CN Quick Start Guide

Setting Up the Machine
2
STEP1
3
4 Check that the paper is flat in the tray.
5 Gently adjust the paper side guides with both
hands and the paper length guide to fit the
paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
6
7 Slowly push the paper tray completely into the
machine.
8 While holding the paper tray in place, pull out
the paper support ( ) until it clicks, and then
unfold the paper support flap ( ).

Brother DCP-540CN Specifications

General

Brand	Brother
Model	DCP-540CN
Category	All in One Printer
Language	English