Brother DCP-540CN - For USB Interface Users

Installing the Driver & Software
8
STEP2
Windows
®
USB
Windows
®
1
For USB Interface Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional
x64 Edition)
1 Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2 Turn on your PC.
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
3 Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
4 The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
5 After reading and accepting the ScanSoft
®
PaperPort
®
SE License Agreement, click Yes.
6 The installation of PaperPort
®
SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
7 When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
8 Choose Standard (DCP-330C) or
Local Connection (DCP-540CN), and then
click Next. The installation continues.
9 When this screen appears, go to the next step.
10
11
12
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.