Brother DCP-540CN Quick Start Guide

Setting Up the Machine
1
STEP1
1
1 Removing the protective
parts
1 Remove the protective tape and film covering
the scanner glass.
2 Remove the foam bag containing the ink
cartridges from on top of the paper tray.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
2 Loading paper
1 Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
2

Brother DCP-540CN Specifications

General

Brand	Brother
Model	DCP-540CN
Category	All in One Printer
Language	English