Brother DCP-7020 - Page 15

14
Installing the Drivers & Software
9
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows
®
XP)
(For Windows
®
98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.
0
Plug in the power cord and turn on the
machine.
A
For Windows
®
98/98SE/Me/2000
Professional users, click Next.
For Windows
®
XP users, wait for a while
since the installation of the Brother drivers
will automatically start. The screens appear
one after another.
DO NOT try to cancel any of the
screens during this installation.
B
When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
For Parallel Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP)
Brother recommends that you connect the
machine directly to your computer.
Step 2