Brother DCP-7020 - Install the Power Cord; Selecting Your Language (Canada Only); Setting the LCD Contrast; Step 1

6
Setting Up the Machine
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
1
Press Menu.
2
Press the or
to select
1.General Setup
.
Press Set.
3
Press the or
to select
0.Local Language
.
Press Set.
4
Press the or
to
select your language
(
English
or
Français
), and then press
Set.
5
Press Stop/Exit
.
You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu and or
to select
1.General Setup
.
Press Set.
2
Press or
to select
5.LCD Contrast
.
Press Set.
3
Press or
to
select
Light
or
Dark
.
Press Set.
4
Press Stop/Exit
.
3 Install the Power Cord
4
Selecting Your
Language (Canada Only)
Local Language
English
5 Setting the LCD Contrast
General Setup
5.LCD Contrast
Step 1