Chapter 6
6 - 18
3
Gently clean the laser scanner window
by wiping it with a clean soft, dry,
lint-free cloth. Do not use isopropyl
alcohol.
4
Put the drum unit and toner cartridge
assembly back into the DCP.
5
Close the front cover.
6
Plug the DCP’s power cord back into the
AC power outlet first, and then plug in
the telephone line cord.
Turn on the DCP’s power switch.
CAUTION
To prevent damage to the DCP from static
electricity, do not touch the electrodes
shown below.
Laser Scanner
Window
To Next Page
Loading...
