EasyManua.ls Logo

Brother DCP-7020 - How to Replace the Toner Cartridge

Brother DCP-7020
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6
6 - 20
How to replace the toner
cartridge
1
Open the front cover and pull out the
drum unit and toner cartridge assembly.
2
Hold down the lock lever on the left and
pull the toner cartridge out of the drum
unit.
3
Unpack the new toner cartridge. Place
the used toner cartridge into the
aluminum bag and discard it according
to local regulations.
WARNING
Just after you use the DCP, some internal
parts of the machine will be extremely
HOT! Never touch the shaded parts
shown in the illustration.
CAUTION
To prevent damage to the DCP from static
electricity, do not touch the electrodes
shown below.
CAUTION
Place the drum unit on a drop cloth or
large piece of disposable paper to
avoid spilling and scattering the toner.
Handle the toner cartridge carefully. If
toner scatters on your hands or
clothes, immediately wipe it off or wash
it with cold water.

Table of Contents

Other manuals for Brother DCP-7020

Related product manuals