Brother DCP-7030 - LCD Contrast; User Settings List; Network Configuration List (DCP-7045 N Only)

General setup
19
3
LCD contrast 3
You can change the contrast to make the
LCD look lighter or darker.
a Press Menu.
b Press a or b to choose 1.General
Setup.
Press OK.
c Press a or b to choose 5.LCD
Contrast.
Press OK.
d Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
e Press Stop/Exit.
User Settings List 3
You can print a list of the settings you
programmed.
a Press Menu.
b Press a or b to choose 1.General
Setup.
Press OK.
c Press a or b to choose 6.User
Settings.
Press OK.
d Press Start.
e Press Stop/Exit.
Network Configuration
List (DCP-7045N only)
3
The Network Configuration List prints a report
listing all the current network configuration
including the network print server settings.
Note
Node name: Node name appears in the
Network Configuration List. The default
node name is “BRNXXXXXXXXXXXX”.
a Press Menu.
b Press a or b to choose 1.General
Setup.
Press OK.
c Press a or b to choose 7.Network
Config.
Press OK.
d Press Start.
e Press Stop/Exit.