How to fix black toner marks across the page on Brother All in One Printer?
Ensure you are using paper that meets our specifications. If using label sheets, glue may be stuck to the OPC drum; clean the drum unit. Avoid using paper with clips or staples. If the unpacked drum unit was exposed to direct light, it may be damaged. The toner cartridge or drum unit may also be damaged and need replacing.
How to fix line across the page on Brother DCP-7040 All in One Printer?
Clean the laser scanner window and the corona wire inside the drum unit. If the problem continues, the drum unit may be damaged and need replacement.
How to fix 'Toner Low' on Brother DCP-7040?
If your Brother All in One Printer displays 'Toner Low', prepare a new toner cartridge. If the toner is empty, replace it.
What to do if there is a paper jam inside Brother All in One Printer?
If you encounter a paper jam inside your Brother All in One Printer, open the front cover, completely pull out the drum unit, and then remove the jammed paper.
How to clear paper jam in the rear of Brother DCP-7040?
To resolve a 'Paper jam in the rear of the machine' error on your Brother All in One Printer, open the back cover and remove the jammed paper.
What to do for 'Toner Life End' message on Brother DCP-7040 All in One Printer?
If your Brother All in One Printer indicates 'Toner Life End', gently shake the toner cartridge from side to side and reinstall it. This may help redistribute the toner and temporarily resolve the issue. The cause may be that the toner sensor detects that the cartridge is nearly empty, or the drum counter has reached its upper limit.
What does 'Drum End Soon' mean on Brother DCP-7040?
If your Brother All in One Printer displays 'Drum End Soon', replace the drum unit with a new one. This is because the drum counter has reached its upper limit.
How to clear paper jam in Tray 1 of Brother All in One Printer?
If your Brother All in One Printer displays 'Paper jam in Tray 1 (T1)', remove the jammed paper from the tray.
How to clear paper jam near paper eject tray of Brother DCP-7040 All in One Printer?
To resolve a 'Paper jam near paper eject tray' error on your Brother All in One Printer, remove the jammed paper near the paper eject tray or the back cover.
What to do if my Brother Printer says No Paper?
If your Brother Printer displays a 'No Paper' message, it means the printer is either out of paper or the paper is not loaded correctly. You can either refill the paper in the paper tray and then press Start, or remove the paper, load it again, and then press Start.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 22 ppm |
| Input color depth | 48 bit |
| Image formats supported | BMP, PNG |
| Maximum scan resolution | 19200 x 19200 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| N-in-1 copy function (N=) | 2, 4, 9, 16, 25 |
| Copy speed (black, normal quality, A4) | 22 cpm |
| Total input capacity | 250 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 16 MB |
| Sound power level (standby) | 32 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 297 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Standard interfaces | USB 2.0 |
| Dimensions (WxDxH) | 428 x 397 x 305 mm |
| All-in-one functions | Copy, Scan |
| Color all-in-one functions | scan, n |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 5 W |
| Power consumption (PowerSave) | 10 W |
| Power consumption (average operating) | 320 W |
| Operating temperature (T-T) | 50 - 91 °F |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package weight | 14.900 g |
| Maximum duty cycle | 10000 pages per month |
Overview of the manual's content and how to use it.
Guide on how to use the manual effectively.
Explains symbols and text conventions used in the guide.
Instructions for accessing advanced guides on CD-ROM.
How to access and view user guides.
Description of the machine's control panel buttons and LCD.
Instructions for loading paper and documents into the machine.
Step-by-step instructions for loading paper into the tray.
Details the margins that cannot be printed on paper.
Lists compatible paper types and media for optimal results.
Suggestions for paper types to achieve the best print quality.
Information on paper sizes and types for the paper tray and manual feed.
Guidelines for using special paper types like envelopes and labels.
How to load documents into the Automatic Document Feeder.
Instructions for scanning documents using the flatbed scanner glass.
Configuration options for machine settings.
How to configure paper type and size settings on the machine.
Adjusting the beeper volume for machine alerts.
Settings for conserving power and toner.
Configuring the machine's automatic sleep mode.
How to adjust the brightness of the LCD screen.
Printing a list of current machine settings.
Printing network settings report.
Procedures for performing copy operations.
Steps for making single or multiple copies.
How to cancel an ongoing copy job.
How to temporarily change copy settings.
Adjusting copy size ratios.
How to change contrast for copies.
Quick access to copy settings like Quality, Stack/Sort, Page Layout.
Settings for optimizing copy quality (Auto, Text, Photo).
How to sort copies when using the ADF.
Copying multiple pages onto a single sheet.
Handling the "Out of Memory" error during copying.
Information on software and network capabilities specific to the DCP-7045N.
Guide to accessing and navigating HTML user guides.
Instructions for Macintosh users to view guides.
Information regarding safety, legal compliance, and regulations.
Recommendations for placing the machine safely and optimally.
General safety warnings and precautions for using the machine.
Laser safety compliance information.
Safety instructions regarding power disconnection and UK wiring.
Network connection safety and interference compliance.
Environmental directives and energy efficiency statements.
Detailed safety guidelines for product use and maintenance.
List of registered trademarks used in the manual.
Guidance for resolving issues and performing regular maintenance.
Tips for resolving common machine problems.
Solutions for issues affecting copy print quality.
Troubleshooting steps for printing errors or failures.
Solutions for problems encountered during scanning.
Troubleshooting steps for software installation or printing issues.
Solutions for paper loading and feeding problems.
Recommendations for improving print quality issues.
Troubleshooting network connectivity and printing/scanning issues.
Explanations and actions for machine error messages.
Steps to clear paper jams in the ADF.
Procedures for clearing paper jams in various parts of the machine.
Procedures for cleaning and maintaining the machine.
Instructions for cleaning the exterior of the printer.
How to clean the scanner glass for optimal scans.
Procedure for cleaning the laser scanner window.
Steps to clean the corona wire for print quality.
Instructions for cleaning the drum unit.
When and how to replace toner cartridges and drum units.
Step-by-step guide for replacing the toner cartridge.
Step-by-step guide for replacing the drum unit.
Instructions for safely packing the machine for transport.
How to use the LCD for machine programming.
Reference guide for machine menu selections and options.
Information on how menu settings are stored.
Explanation of the function of each menu key.
Step-by-step guide to navigate the machine's menu system.
Overview of printer type, memory, power, and dimensions.
Details on supported paper types, sizes, weights, and capacities.
Technical details for copy functions like resolution and speed.
Technical details for scanning functions like resolution and document size.
Details on printer emulations, drivers, resolution, and speed.
Information on USB and LAN interface connections.
Minimum system requirements for PC compatibility.
Information on toner cartridge and drum unit life and part numbers.
Network board model, LAN support, and protocols.
Definitions of features and terms used in the manual.
Alphabetical listing of topics and their page numbers for quick reference.
To Next Page
