Brother DCP-7045N - Printing the Network Configuration List

Control panel setup
28
3
Printing the Network Configuration List 3
Note
Node name: Node name appears in the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx”.
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
For MFC-7440N
3
a Press Reports.
b Press a or b to choose Network Config.
Press OK.
For DCP-7045N:
3
a Press Menu.
b Press a or b to choose General Setup.
Press OK.
c Press a or b to choose Network Config.
Press OK.
d Press Start.