Brother DCP-7055 - Page 114

84
Level 1 Level 2 Level 3 Options Descriptions Page
2.Copy 1.Quality — Auto*
Text
Photo
Graph
You can choose the
Copy resolution for
your type of
document.
See
1
.
2.Brightness — -nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Adjust the brightness
for copies.
3.Contrast — -nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Adjusts the contrast
for copies.
1
See Advanced User's Guide.
The factory settings are shown in Bold with an asterisk.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
3.Network
(For
DCP-7065DN)
1.TCP/IP 1.Boot
Method
— Auto*
Static
RARP
BOOTP
DHCP
Chooses the Boot
method that best
suits your needs.
2.IP Address — [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3.Subnet
Mask
— [000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet
mask.
4.Gateway — [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway
address.
5.Node Name — BRNXXXXXXXXXXXX Enter the Node
name.
6.WINS
Config
— Auto*
Static
Chooses the WINS
configuration mode.
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.