Brother DCP-7055W - Cleaning the Scanner Glass

Routine maintenance
45
A
e Wipe the inside and the outside of the
paper tray with a dry, lint-free soft cloth
to remove dust.
f Re-load the paper and put the paper tray
firmly back in the machine.
g Plug the machine’s power cord back into
the electrical socket first, connect all
cables. Turn on the machine.
Cleaning the scanner glass A
a Turn off the machine. Disconnect all
cables, and then unplug the power cord
from the electrical socket.
b Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.
c (For DCP-7065DN) In the ADF unit,
clean the white bar (1) and the scanner
glass strip (2) underneath it with a soft
lint-free cloth moistened with water.
1
2
3
2
1