Brother DCP-8040 - Page 125

USING YOUR MACHINE WITH A MACINTOSH
®
7 - 11
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
■
If a Brother Native Driver (MFC-XXX) is already listed in
Printer list, you will need to delete it and then install the PS
driver.
■
To use the PS driver with a USB cable, you need to set the
Emulation
to
BR-Script3
(For MFC-8440, MFC-8840D
and MFC-8840DN,
Menu
,
4
,
1
. DCP-8040 and
DCP-8045D,
Menu
,
3
,
1
.) before connecting the USB
cable. (See Setting the Emulation Selection on page 1-17.)
1
Select Applications from the Go menu.
2
Open the Utilities folder.
■
If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”,
only one printer driver for a machine can be registered in
Print Center.