NETWORK SCANNING (WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
8 - 1
8
To use the machine as a Network Scanner, the NC-9100h Network
board should be installed into the machine (MFC-8840DN standard)
and configured with TCP/IP and mail server settings if you use Scan
to E-mail (E-mail server). You can set or change NC-9100h settings
from your control panel, with the BRAdmin Professional utility and
with Web Management. (Please see the NC-9100h Network User's
Guide on the CD-ROM.)
Network License
This product includes a single PC license. If you purchase an
optional Network LAN board NC-9100h that includes the license for
up to 4 additional Users, you can install the MFL-Pro Software Suite
including ScanSoft
®
PaperPort
®
9.0SE on up to 5 PCs for use on a
network. If you want to use more than 5 PCs with ScanSoft
®
PaperPort
®
9.0SE installed, please purchase NL-5 which is a
multiple PC license agreement pack for up to an additional 5 Users.
To purchase NL-5, please contact your Brother Sales Office.
Network Scanning
(Windows
®
98/98SE/Me/2000
Professional and XP only)
The screens shown in this chapter are from MFC-8840D.
Max. 25 clients can be connected to one machine on a Network.
For example, if 30 clients try to connect at a time, 5 clients will
not be shown on the LCD.
To Next Page
Loading...
