3 - 12 HOW TO SCAN USING WINDOWS
®
5
Place the original face up in the ADF again, if you used the ADF
in Step 1.
6
Click Start.
This time only the selected area of the original will appear in the
PaperPort
®
9.0SE window (or your software application
window).
7
In the PaperPort
®
9.0SE window, use the options available to
refine the image.
You can enlarge the portion you selected by pressing to
check it. If you want to select the different portion, use to
undo the image.
To Next Page
Loading...
