23
Macintosh
®
Wired Network
Windows
®
Macintosh
®
Wired Network
For Wired Network Interface Users
(Mac OS
®
X 10.3.9 or greater)
11
Before you install
a Make sure your machine is connected to the
power and your Macintosh
®
is ON. You must
be logged on with Administrator rights.
12
Connect the network
cable
a Connect the network interface cable to the LAN
connector marked with a symbol and then
connect it to a free port on your hub.
13
Install MFL-Pro Suite
a Put the supplied CD-ROM into your CD-ROM
drive.
b Double-click Start Here OSX to install.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
c The Brother software will search for the Brother
device. During this time the following screen
will appear.
IMPORTANT
Make sure a USB Flash memory device is not
inserted into the machine.
Note
Please see the Network User’s Guide on the
CD-ROM if you want to install the PS driver.
(Brother’s BR-Script Driver)
To Next Page
Loading...
