5
4
Release the scanner lock
a Push the lever a in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover b.)
5
Connect the power cord
a Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b Plug the AC power cord into an AC outlet. Turn
the power switch on.
6
Choose your language
(If needed)
a Press Menu.
b Press 1.
c Press 0.
d Press or to choose your
language.
Press OK.
e Press Stop/Exit.
7
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu.
b Press 1.
c Press 5.
d Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
e Press Stop/Exit.
IMPORTANT
DO NOT connect the interface cable yet.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
2
1
To Next Page
Loading...
