Brother DCP 8085DN

Making copies
35
5
Adjusting Contrast and
Brightness 5
Contrast 5
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Contrast/Quality.
Press a or b to choose Contrast.
Press OK.
Contrast:-nnonn+c
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Select dc&OK
01
d Press d or c to increase or decrease the
contrast.
Press OK.
e Press Start.
To change the default setting follow the steps
below:
a Press Menu, 2, 4.
b Press d or c to increase or decrease the
contrast. Press OK.
c Press Stop/Exit.
Brightness 5
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press a or b to choose Bright.
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Bright :-nnonn+c
Select dc&OK
01
d Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
e Press Start.
To change the default setting follow the steps
below:
a Press Menu, 2, 3.
b Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
c Press Stop/Exit.