Brother DCP 8085DN

Troubleshooting and routine maintenance
87
C
Cleaning the outside of the
machine C
a Turn off the machine. Disconnect all
cables, and then unplug the power cord
from the electrical socket.
b Pull the paper tray completely out of the
machine.
c Wipe the outside of the machine with a
dry, lint-free soft cloth to remove dust.
d Remove any paper that is in the paper
tray.
e Wipe the inside and the outside of the
paper tray with a dry, lint-free soft cloth
to remove dust.
f Re-load the paper and put the paper tray
firmly back in the machine.
g Plug the machine’s power cord back into
the electrical socket first, and reconnect
all cables. Turn on the machine.
Cleaning the scanner C
a Turn off the machine. Disconnect all
cables and then unplug the power cord
from the electrical socket.
b Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.
1
3
2