Brother DCP-9270CDN - Page 148

Menu and features
119
C
General Setup
(Continued)
Tray Setting
(Continued)
Tray Use:Copy — Tray#1 Only
Tray#2 Only
MP Only
MP>T1>T2*
T1>T2>MP
(Tray#2 or T2
appears only if
you installed the
optional paper
tray.)
Chooses the tray that
will be used for Copy
mode.
18
Tray Use:Print — Tray#1 Only
Tray#2 Only
MP Only
MP>T1>T2*
T1>T2>MP
(Tray#2 or T2
appears only if
you installed the
optional paper
tray.)
Chooses the tray that
will be used for Print
mode.
18
Beeper ——Off
Low
Med*
High
Adjusts the beeper
volume.
9
Ecology Toner Save — On
Off*
Increases the page
yield of the toner
cartridge.
See
1
.
Sleep Time — Range varies
depending on
models.
3 Mins*
Conserves power.
LCD Settings Backlight — Light*
Med
Dark
You can adjust the
brightness of the
LCD backlight.
Dim Timer — Off*
10 Secs
20 Secs
30 Secs
You can set how long
the LCD backlight
stays on for after the
last key press.
Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
1
See Advanced User's Guide
The factory settings are shown in Bold with an asterisk.