Brother DCP-9270CDN - Restoring All Copy Settings to the Factory Settings; Setting Your Changes as the New Default

Making copies
19
4
Setting your changes as the
new default 4
You can save the copy settings for Quality,
Brightness, Contrast and
Color Adjust you use most often by
setting them as the default. These settings
will stay until you change them again.
a Press (COPY).
b Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
d or c to display Set New Default.
Press Set New Default.
d Press Yes.
e Press Stop/Exit.
Restoring all copy settings to
the factory settings 4
You can restore all the copy settings you
have changed to the factory settings. These
settings will stay until you change them again.
a Press (COPY).
b After changing the last setting, press
d or c to display Factory Reset.
Press Factory Reset.
c Press Yes.
d Press Stop/Exit.