Brother DCP-9270CDN - Control Panel Overview

Chapter 1
6
Control panel overview 1
1LCD
This is a Touchscreen LCD. You can access
the menus and options by pressing buttons
displayed on the screen.
2 Mode keys:
SCAN
Puts the machine in Scan mode.
COPY
Puts the machine in Copy mode.
3 Numeric keys
Use these keys to enter text.
4Stop/Exit
Stops an operation or exits from a menu.
5Start:
Colour
Lets you start making copies in full colour.
Mono
Lets you start making copies in black & white.
6 Print Data / Job Cancel
Cancels a programmed print job and clears it
from the machine’s memory. To cancel
multiple print jobs, hold down this key until the
LCD shows Cancel Printing (All).
Also, this key will flash depending on the
machine’s status.
1
01.01.2011 15:15
MENU
Secure
Print
Direct
Print
Machine Status Description
Ready Mode
The machine is ready to
print, in sleep mode, there
is no print data, or the
power switch is off.
Receiving Data
Green (blinking)
The machine is either
receiving data from the
computer, processing data
in memory, or printing data.
Data Remaining
in Memory
Green
Print data remains in the
machine memory.