Brother DCP-J1100DW-AiB User Manual

Home > Fax > Send a Fax > Send a Fax Manually
Send a Fax Manually
Related Models: MFC-J1300DW
Manual fax transmission lets you hear the dialling, ringing and fax-receiving tones while sending a fax.
(Not available in South Africa)
1. Load your document.
2. Press [Fax].
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
3. Press [Hook] and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press [Fax Start].
• If you are using the scanner glass, press [Send].
(For South Africa only)
To send a fax manually, do the following:
Load your document. To listen for a dial tone, pick up the handset of the external telephone. Dial the fax number
using the external telephone. When you hear fax tones, press and then press [Fax Start]. If you are
using the scanner glass, press [Send]. Replace the handset of the external phone.
Related Information
• Send a Fax
202

Brother DCP-J1100DW-AiB Specifications

General

Brand	Brother
Model	DCP-J1100DW-AiB
Category	Printer
Language	English