Home > Fax > Send a Fax > Change the Fax Auto Redial Setting
Change the Fax Auto Redial Setting
Related Models: MFC-J1300DW
If you are sending a fax automatically and the line is busy when the Fax Auto Redial setting is set to [On], the
machine redials up to three times at five minute intervals.
The default setting is [On].
1. Press [Settings] > [All Settings] > [Initial Setup] > [Fax Auto Redial].
2. Press [On] or [Off].
3. Press .
Related Information
• Send a Fax
209
To Next Page
Loading...
Need help?
General