Brother DCP-J1100DW-AiB User Manual

Home > Introduction to Your Brother Machine > Set the Default Screen of the Feature Mode
Set the Default Screen of the Feature Mode
You can change the default screen of the Scan mode.
1. Press [Settings] > [All Settings] > [General Setup] > [Screen Settings] > [Scan
Screen].
2. Press a or b to display the scan options, and then press the option you want in the default screen.
3. Press
.
Related Information
• Introduction to Your Brother Machine
18

Brother DCP-J1100DW-AiB Specifications

General

Brand	Brother
Model	DCP-J1100DW-AiB
Category	Printer
Language	English