General information
7
1
Entering Text 1
When you must enter text into the machine, a
keyboard appears on the Touchscreen.
Press to cycle between letters,
numbers and special characters.
• To change between lowercase or
uppercase, press .
• You can change the keyboard setting of
the Touchscreen.
(See Online User’s Guide.)
Inserting spaces 1
To enter a space, press Space or you can
press c to move the cursor.
The characters that are available may
differ depending on your country.
Making corrections 1
If you entered an incorrect character and
want to change it, press d to move the cursor
to highlight the incorrect character, and then
press . Enter the correct character. You
can also use the cursor to go back and insert
characters.
Press for each character you want to
erase, or press and hold to erase all the
characters.
To Next Page
Loading...
