Brother DCP-J925DW - Turning Memory Security On;Off

Security features (MFC-J825DW only)
5
2
Changing your Memory Security
password
2
a Press Menu.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Miscellaneous.
e Press Miscellaneous.
f Press Mem Security.
g Press Set Password.
h Enter the registered 4-digit number for
the current password by pressing the
buttons on the Touchscreen.
Press OK.
i Enter a 4-digit number for a new
password by pressing the buttons on the
Touchscreen.
Press OK.
j When the LCD shows Verify:,
re-enter the new password by pressing
the buttons on the Touchscreen.
Press OK.
k Press Stop/Exit.
Turning Memory Security
on/off 2
Turning on Memory Security 2
a Press Menu.
b Press a or b to choose Fax.
c Press Fax.
d Press a or b to display
Miscellaneous.
e Press Miscellaneous.
f Press Mem Security.
g Press Set Security.
h Enter the registered 4-digit password by
pressing the buttons on the
Touchscreen.
Press OK.
The machine goes offline and the LCD
shows Memory Security.
Note
If there is a power failure the data will stay
in memory for approximately 24 hours.
Turning off Memory Security 2
a Press Unlock.
b Enter the registered 4-digit password by
pressing the buttons on the
Touchscreen.
Press OK.
Memory Security is automatically turned
off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
mode until the registered password is
entered.